Hoppa till huvudinnehåll

27

February

X-Lab 3D Printing Workshop

Xlab photo with text Workshop on it.
Tid: 2023-02-27 17:15 till 19:15 Övrigt

We are hosting a workshop consisting of a brief introduction and start-up guide for the wonderful world of 3D-printing.

We will show you how you use the 3d printers in X-Lab and the process of preparing a 3D model on your computer to be able to print it out. If we have time you will also be able to start your own prints during the workshop session to be collected later. There are some preparations that are helpful for us if you do, but if you are not able to do them we can help you during workshop too!

What to bring (if you are able):
- A laptop (preferably) or a USB stick with a 3d model on it (preferably STL format)

To do before you attend the workshop (not obligatory):
- Download the free program PrusaSlicer, link: https://www.prusa3d.com/page/prusaslicer_424/
- Have a look at
https://www.printables.com/model?o=download_count...
and see if there is a model you would like to print out,
OR: if you have made your own 3d model, make sure it is able to be exported in STL format and bring it with you!

Date and time: 27 February 2023, 17:15 - 19:15, Monday, at X-Lab

How to find us: https://www.lth.se/x-lab/about/how-to-find-us/

https://fb.me/e/2a5OLAMWB



Om händelsen
Tid: 2023-02-27 17:15 till 19:15

Plats
X-Lab

Kontakt
hajnalka [dot] bodnar [at] design [dot] lth [dot] se

Spara händelsen till din kalender